Pneumatic Ball Valve
Pneumatic CF8 Full Bore Ball Valve With Limite Switch
Pneumatic CF8 full bore ball valve with limite switch
Pneumatic CF8 full bore ball valve with limite switch working principle
Pneumatic ball valves can be closed tightly with only a 90-degree rotation of the air source using pneumatic actuators.Completely equal body cavity for the medium to provide little resistance, through the flow.pneumatic ball valve is generally considered that the ball valve is most suitable for direct use.The main characteristic of the pneumatic ball valve is its compact structure, easy to operate and maintain, pneumatic ball valve is suitable for water, solvent, acid and natural gas and other general working medium, but also suitable for working conditions of poor medium, such as oxygen, hydrogen peroxide, methane and ethylene.The ball valve body may be integral or modular.
Pneumatic CF8 full bore ball valve with limite switch feature
1. The fluid resistance of pneumatic ball valve is small, and the resistance coefficient is the same as the pipe section of the same length.
2. Pnuematic ball valve is simple structure, small volume and light weight.
3. Compact and reliable, the sealing surface material of the pneumatic ball valve is widely used in plastic, good sealing, and has been widely used in the vacuum system.
4. Pneumatic ball valve is easy operation, fast opening and closing, rotation of 90° from full open to full close, convenient for remote control.
5. Pneumatic ball valve is easy maintenance, simple pneumatic ball valve structure, sealing ring is generally active, disassembly and replacement are relatively convenient.
6. When fully open or fully closed , the sealing surface of the pneumatic ball valve ball and seat is isolated from the media, which will not cause erosion of the valve sealing surface when passing through.
7. Pneumatic ball valve is wide range of applications, sizes from small to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied.
8. Because the pneumatic ball valve power source is gas, generally 0.2-0.8mpa pressure, relatively safe.Pneumatic ball valve if the air leakage, relative to hydraulic, electric, gas can be discharged directly, no pollution to the environment, at the same time has a higher safety.
Pneumatic CF8 full bore ball valve with limite switch performance parameter
Pneumatic actuator: double action, single action normally closed, single action normally open
Accessories: optional directional solenoid valve, limit switch, air filter pressure reducing valve, electric positioner, handwheel mechanism
Voltage: AC220V, AC110V, AC380V, DC12V, DC24V, DC110V
Nominal diameter:DN15-600mm
Nominal pressure: 1.6mpa – 6.4mpa CL150-CL300
Suitable temperature:-30℃~450℃
Connection mode: flange type, thread type, welding type, clamp quick-install type
Valve body structure: O – type floating ball, fixed
Body material:WCB, 304, 316, 316L, etc
Valve ball material:WCB, 304, 316, 316L, etc
Seat lining: PTFE, PPL, hard seal, etc
Suitable medium: steam, liquid water, gas, etc
Pneumatic CF8 full bore ball valve with limite switch actuator information:
Pneumatic CF8 full bore ball valve with limite switch adopts a new series of pneumatic actuators, with double action type and single action type (spring return), pinion and rack drive, safe and reliable;Large diameter valve using series AW pneumatic actuator fork transmission, reasonable structure, large output torque, double action and single action.
1. Geared double piston with large output torque and small volume.
2. The cylinder is made of aluminum and gold, light in weight and beautiful in appearance.
3. Manual operation mechanism can be installed at the top and bottom.
4, rack type connection can adjust the opening Angle, rated flow.
5. The actuator can choose feedback indication of live signal and various accessories to realize automatic operation.
6. IS05211 standard connection provides convenience for product installation and replacement.
7. Pitch screws adjusted at both ends can provide ±4° adjustable range for standard products at 0° and 90°.Ensures synchronization accuracy with ball valve.
FAQ
What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union,LianlianPay or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.
What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone’s satisfaction
Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
How about the shipping fees?
The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.
Contact us
For inquiries about product technology, product purchases,catalogs, and quality.