Pneumatic Control Valve
Stainless Steel Pneumatic 3 Way Mixing/Diverting Regulating Valve

stainless steel pneumatic 3 way mixing/diverting regulating valve

Pneumatic 3 way mixing/diverting regulating valve is mixting structure to mix two-way flowing fluid into one-way fluid ,penumatic 3 way control valve has diverting and mixing structure,Pneumatic 3 way mixing/diverting regulating valve adopts double valve cores up and down guide structure, equipped with multiple spring actuator.Pneumatic 3 way mixing/diverting regulating valve can replace two sets two-way valve and widely used in many occasions to regulate pressure, flow rate, temperature and liquid level.​

Pneumatic 3 way mixing regulating/control valve body has the features as below:

1.compact structure, light weight, sensitive action, low pressure drop loss, new high allowable pressure, large valve capacity, accurate flow characteristics and convenient maintenance, etc.,
2.Pneumatic 3 way mixing regulating valve can be used for various working conditions, especially for the temperature control system of oil industry heat exchange and automatic control of other industries.
3.Spool structure with side guiding, well stability, no vibration, low noisy, Pneumatic 3 way mixing regulating valve can bear high pressure difference, easy for connection.
4.While with low nominal size and pressure difference, 3 way mixing regulating valve can be used in diverting occasion. However, while nominal size higher than DN100 and high pressure difference, Pneumatic 3 way mixting regulating valve and Pneumatic 3 way diverting regulating valve can’t be exchanged.
Specification
Pneumatic 3 way control valve Body type: 3-way casting globe type
Spool type: 3-way double seat spool
Nominal size: DN20~300 NPS 3/4〞~ 12〞
Nominal pressure: PN16 ~ 100、 CLASS 150LB ~ 600LB
Connection: flange: FF、RF、MF、RTJ
Welding: SW、BW
Flange dimension: According to to IEC 60534
Pneumatic 3 way control valve
Bonnet type:
Ⅰ:standard type(-20℃~230℃)
Ⅱ:Radiator type: (-45℃~ high than 230℃ occasion)
Ⅲ:Low temperature extended type(-196℃~ -45℃)
Ⅳ:Bellow seal type
Ⅴ:Warm insulation Jacket type
Packing: V type PFTE packing, flex. graphite packing, etc.
Gasket: Metal graphite packing
Control valve Actuator: Pneumatic:multi-spring diaphragm actuator, piston type actuator.

Material list

Component name Control Valve Material
Body/Bonnet WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat 304/316/316L(overlaying stellite alloy)
Packing Normal:-196~150℃ is PTFE,RTFE,>230℃ is flexible graphite
Bellow 304,316,316L
Gasket Normal:Stainless steel with flexible graphite,Special:Metal tooth type gasket
Stem 2Cr13/17-4PH/304/316/316L
Diaphragm Cover Normal:Q235,Special:304
Diaphragm NBR with reinforced polyester fabric
Spring Normal:60Si2Mn,Special:50CrVa

Valve performance

Pneumatic 3 way control valve Flow characteristic Linear, percentage
Allowable range 30: 1
Rated Cv value Percentage / linear CV8.5~1280
Pneumatic 3 way regulating valve/control valve
Allowable leakage
Metal seal: IV grade(0.01% rated capacity)
Leakage standard: GB/T 4213
Pneumatic 3 way control valve Performance
Intrinsic error(%) ±1.5
Return difference(%) ≤1.5
Dead zone(%) ≤0.6
Difference from beginning to end point(%) ±2.5
Rated travel difference(%) ≤2.5

Valve Special Requirment

Special test Material penetration flaw detection (PT), radiator test (RT), flow characteristic test,
low temperature test.
Special treatment Trim nitrogen treatment, seat hard alloy treatment.
Special rinse Degreasing and dehydration treatment
Special condition Special piping or connection, vacuum condition, S.S fastener, special coating.
Special dimension Customized face to face length or dimension
Test and inspection Third party test report

Technical parameter

Seat diameter(mm) 25 32 40 50 65 80 100 125 150 200 250 300
Rated flow coefficient, CV 8.5 13 21 34 53 85 135 210 340 535 800 1280
Nominal size Travel Option flow coefficient Cv(★standard ●recommended)
DN25 16 mm
DN32 25 mm
DN40
DN50
DN65 40mm
DN80
DN100
DN125 60mm
DN150
DN200
DN250 100mm
DN300

 

FAQ

What are your prices?

Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.

Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website

Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

You can make the payment to our bank account, Western Union,LianlianPay or PayPal:

30% deposit in advance, 70% balance against the copy of B/L.

We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone’s satisfaction

Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.

 

The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.

 
 

Contact us

For inquiries about product technology, product purchases,catalogs, and quality.