Electric Control Valve
Hot Water Mixing/divider carbon steel electric 3 way control valve
Hot water mixing/divider carbon steel electric 3 way control valve
hot water mixing/divider carbon steel electric 3 way control valve Specification
| control valve Body type: | 3-way casting globe type |
| Spool type: | 3-way double seat spool |
| Nominal size: | DN20~300,、 NPS 3/4〞~ 12〞 |
| Nominal pressure: | PN16 ~ 100、 CLASS 150LB ~ 600LB |
| Connection: flange: | FF、RF、MF、RTJ |
| Welding: | SW、BW |
| Flange dimension: | According to to IEC 60534 |
| Electric 3 way control valve Bonnet type: |
Ⅰ:standard type（-20℃~230℃） Ⅱ:Radiator type: （-45℃~ high than 230℃ occasion） Ⅲ:Low temperature extended type（-196℃~ -45℃） Ⅳ:Bellow seal type Ⅴ:Warm insulation Jacket type |
| Packing: | V type PFTE packing, flex. graphite packing, etc. |
| Gasket: | Metal graphite packing |
| Electric 3 way control valve Actuator: |
Electric: 3810L series smart actuator, PSL series actuator. |
hot water mixing/divider carbon steel electric 3 way control valve performance
| Electric 3 way control valve Flow characteristic | Linear, percentage | |
| Allowable range | 30: 1 | |
| Rated Cv value | Percentage / linear CV8.5~1280 | |
| Electric 3 way control valve Allowable leakage |
Metal seal: IV grade（0.01% rated capacity） Leakage standard: GB/T 4213 |
|
| ZRHF Electric 3 way control valve Performance | ||
| Intrinsic error (%) | ±1.0 | |
| Return difference(%) | ≤1.0 | |
| Dead zone(%) | ≤1.0 | |
| Difference from beginning to end point(%) | ±2.5 | |
| Rated travel difference(%) | ≤2.5 | |
hot water mixing/divider carbon steel electric 3 way control valve special requirement
| Special test | Material penetration flaw detection (PT), radiator test (RT), flow characteristic test, low temperature test. |
| Special treatment | Trim nitrogen treatment, seat hard alloy treatment. |
| Special rinse | Degreasing and dehydration treatment |
| Special condition | Special piping or connection, vacuum condition, S.S fastener, special coating. |
| Special dimension | Customized face to face length or dimension |
| Test and inspection | Third party test report |
hot water mixing/divider carbon steel electric 3 way control valve actuator parameter
| Electric 3 way control valve Type\ Method |
Electric actuator |
| 3810L series | |
| Intelligent integrated type | |
| Usage | Regulating |
| Air supply pressure or Power supply voltage | Power: AC 200V±10% 50Hz Or Power: AC 380V±10% 50Hz |
| Connector | Normal type: cable inlet 2-PF(G1/2〞) Explosive proof: Protection jacket PF(G3/4〞) |
| Direct action | Input signal increase, stem descend, valve close. |
| Reaction | Input signal increase, stem ascend, valve open. |
| Input signal | Input/output4～20mA.DC |
| Lag | ≤0.8%FS |
| Linear type | ≤+1%FS |
| Environmental temperature | Standard type: -10℃～+60℃ With space heater : -35℃～+60℃ Explosive proof: -10℃～+40℃ |
| Electric 3 way control valve Accessories |
Space heater (normal type) Non-standard accessories, need special customized notes. |
hot water mixing/divider carbon steel electric 3 way control valve parameter
-
Seat diamter（mm） 25 32 40 50 65 80 100 125 150 200 250 300 Rated flow coefficient, CV 8.5 13 21 34 53 85 135 210 340 535 800 1280 Nominal size Travel Option flow coefficient Cv（★standard ●recommended） DN25 16 mm ★ DN32 25 mm ★ DN40 ● ★ DN50 ● ● ★ DN65 40mm ★ DN80 ● ★ DN100 ● ● ★ DN125 60mm ★ DN150 ● ★ DN200 ● ● ★ DN250 100mm ● ● ★ DN300 ● ● ★ Electric actuator Electric 3 way control valve
Metal sealing max. allowable pressure difference（MPa）Type Thrust（N） 3810L-08 800 1.52 3810L-20 2000 3.05 1.86 1.19 0.76 3810L-30 3000 2.79 1.79 1.14 3810L-50 5000 4.66 2.98 1.91 1.13 0.6 0.47 3810L-65 6500 1.35 0.8 0.57 0.39 0.26 0.16 3810L-99 10000 0.61 0.42 0.20 0.17 0.11 3810L-160 16000 0.97 0.67 0.35 0.27 0.18
FAQ
What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union,LianlianPay or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.
What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone’s satisfaction
Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
How about the shipping fees?
The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.
Contact us
For inquiries about product technology, product purchases,catalogs, and quality.